Advertisement
12.
Apply the decal to the fuse cover as shown in
Figure
11.
1. 25 mm (1 inch)
2. 6 mm (1/4 inch)
13.
Install the fuse cover to the switch mount using
2 thumb screws and 2 push nuts
Note:
Ensure that the push nuts are installed
on the inside of the fuse cover
1. Push nut
2. Fuse cover
Figure 11
3. Decal—inside of fuse
cover
(Figure
(Figure
Figure 12
3. Thumb screw
14.
Adjust the control assembly so that the switches
are accessible.
15.
Tighten all the fasteners.
16.
Install the control cover to the switch mount
using 2 push rivets and 6 hex-head screws (1/4
x 3/4 inch) as shown in
g304374
12).
1. Push rivet
2. Hex-head screw
12).
g304295
6
Figure
13.
Figure 13
3. Control cover
g319852
Advertisement
