Advertisement
Procedure
1.
Remove the flange-head bolt (3/8 x 2-3/4
inches) and flange nut (3/8 inch) securing the
bumper to the rear tube frame on each side of
the bumper
(Figure
Figure 22
1. Rear tube frame
2. Flange-head bolt (3/8 x
2-3/4 inches)
2.
Secure the left mount and right mount to rear
frame tubes using 2 hex-head bolts (3/8 x 3
inches) and 2 locknuts (3/8 inch) on each side
(Figure
23).
Figure 23
1. Hex-head bolt (3/8 x 3
inches)
2. Left mount
22).
3. Bumper
4. Flange nut (3/8 inch)
3. Locknut (3/8 inch)
3.
Secure the left short mount and right short
mount to the left mount and right mount using 4
carriage bolts (5/16 x 3/4 inch) and 4 flange nuts
(5/16 inch) as shown in
1. Left short mount
g303770
2. Flange nut (5/16 inch)
4.
Secure the left light housing and right light
housing to the left short mount and right short
mount using 4 carriage bolts (1/4 x 5/8 inch) and
4 locknuts (1/4 inch) as shown in
g304042
1. Left short mount
2. Carriage bolt (1/4 x 5/8
inch)
10
Figure
24.
Figure 24
3. Left mount
4. Carriage bolt (5/16 x 3/4
inch)
Figure
Figure 25
3. Left light housing
4. Locknut (1/4 inch)
g304044
25.
g319940
Advertisement
