5.
Secure the taillights to the inner mount
assemblies using 4 pan-head screws (#10 x
1-1/4 inches) and 4 flange nuts (#10) as shown
in
Figure
34.
Figure 34
1. Flange nut (#10)
2. Inner mount assembly
3. Amber lens
6.
Connect the wire-harness connector labeled
R
L
LH (P01) to rear light
EAR
IGHT
7.
Connect the wire-harness connector labeled
R
L
RH (P02) to rear light
EAR
IGHT
g304304
4. Red lens
5. Pan-head screw (#10 x
1-1/4 inches)
(Figure
33).
(Figure
33).
8.
Secure the assembled taillights to the taillight
housings using 8 button-head bolts (1/4 x 3/4
inch) as shown in
Ensure that you install the taillights with the
yellow lens on top
1. Button-head bolt (1/4 x 3/4
inch)
9.
Use a cable tie coil the remaining connectors
(J01 and J02) together
14
Figure
35.
(Figure 34
and
Figure
Figure 35
2. Taillight assembly
(Figure
36).
35).
g305040