Programming - Sharp ER-3100 Installation Manual

Table 14
Clear job no,lRAM no. I Note
I I
I
I
400
I
RAM2
I Standard RAM
I
401
W3
Optional RAM
memory chip
402
W4
Optional RAM
memory chip
The above operation clears a correspondingRAM.
7.4 Programming
1. Modification of the SRV-mode program
0 Reprogrammingto select the number of optional PLUS and the code
display (DPT or PLU) for PLU entries and to enable or disable PLU
report zero-skip.
To set A thru D
to o.
Data entry with
numeric keys
In the above key operation, A, B, C, and D are each refer to
preset data of job number 901; and for convenience,data in the
fourth column is called A, the one in the third column B, the one
in the second column C, and the one in the first column D.
Of these data, data C serves to select the number of optional
PLUS. Change it according to Table 15 below.
–38–