BYPASS TRAY UNIT AND FEED ROLLER
3.11 BYPASS TRAY UNIT AND FEED ROLLER
Remove the following before removing the bypass tray and feed roller:
Front Cover 3.2.1
Rear Cover 3.2.3
Middle Cover 3.2.7
Top Cover 3.2.4
Left and Right Side Cover 3.2.5, 3.2.6
3.11.1 BYPASS TRAY UNIT
[A]
[B]
1. Disconnect 1 x for the MP solenoid [A] and 1 x for the MP sensor [B].
2. Remove the 4 x . Remove the by-pass assembly. (Ensure that the cables are
threaded through the frame.)
3. Remove the 2 x from the feed bracket [D]. Remove it from the machine.
G144/G145
[C]
G144R038.WMF
3-30
[D]
G144R039.WMF
SM