Ricoh BP20 Service Manual page 20

SAFETY PRECAUTIONS
TOXIC MATERIALS
This product contains toxic materials that could cause illness if ingested.
1. If the LCD control panel is damaged, it is possible for the liquid inside to leak
out. This liquid is toxic and contact with skin should be avoided. Wash any
splashes from eyes or skin immediately for 15 minutes under running water,
and contact a doctor. See a doctor immediately if the liquid gets into the mouth
or is swallowed.
2. Please keep toner cartridges away from children. The toner powder contained
with the toner cartridge may be harmful if swallowed. Contact a doctor
immediately if toner powder is swallowed.
ELECTRIC SHOCK AND FIRE SAFETY PRECAUTIONS
Failure to follow the following instructions could cause electric shock or fire.
1. Use only the correct voltage. Failure to do so could damage the printer and
potentially cause a fire or electric shock.
2. Use only the power cable supplied with this machine. Use of an incorrectly
specified cable could cause the cable to overheat and potentially cause a fire.
3. Do not overload the power socket. This could lead to overheating of the cables
inside the wall and could lead to a fire.
4. Do not allow water or other liquids to spill into the printer. This can cause
electric shock. Do not let paper clips, pins, or other foreign objects fall into the
printer. These could cause a short circuit leading to an electric shock or fire
hazard. If foreign objects fall into the machine, power off the machine
immediately and disconnect the power cord from the wall outlet.
5. Never touch the plugs on either end of the power cable with wet hands. This
can cause electric shock.
6. Remove the power plug from the wall socket when servicing the printer.
7. Use caution when you insert or remove the power plug. The power plug must
be inserted completely. Otherwise, a poor contact could cause overheating and
lead to a fire. (When removing the power plug, grip the plug firmly and pull. Do
not pull the power cable out by pulling on the cord itself.)
8. Do not allow the power cable to become twisted or bent sharply around
corners. Do not place objects on top of the power cable. If the power cable is
damaged, it could overheat and cause a fire. Exposed cables could cause an
electric shock. Replace a damaged power cable immediately. Do not reuse or
repair a damaged cable. Some chemicals can also attack the coating on the
power cable, weakening the cover or exposing cables. This can cause fire and
shock risks.