TRANSFER UNIT
3.10 TRANSFER UNIT
Remove the following before removing the transfer assembly:
Front Cover 3.2.1
Rear Cover 3.2.3
Middle Cover 3.2.7
Top Cover 3.2.4
Left and Right Side Cover 3.2.5, 3.2.6
[A]
1. Remove the 3 x . Remove the transfer ground [A].
NOTE: The transfer ground is designed to prevent unwanted particles from
adhering to the transfer roller.
2. Unplug 1 x [B].
3. Remove the PLT holder [C] and the PTL lens [D].
G144/G145
[C]
[B]
G144R034.WMF
3-28
[D]
G144R035.WMF
SM