Power Management; Power Modes - Denon HOME 250 Owner's Manual

Contents

Power management

Power modes

o Quick Start Mode
This speaker automatically enters "Quick Start Mode" to save power in
the following cases. During "Quick Start Mode", speaker operations
cause the power to turn on.
During "Quick Start Mode", the status LED lights in dim blue.
Ethernet
n
After around 20 minutes of no operation and no network access
after playing music via Ethernet.
Wi-Fi
n
After around 20 minutes of no operation and no network access
after playing music via Wi-Fi.
USB
n
After around 20 minutes of no operation and no network access
after playing music from a USB memory device.
Bluetooth
n
After the Bluetooth connection is disconnected and there is around
20 minutes of no operation and no network access after playing
music via Bluetooth.
AUX IN
n
After around 20 minutes of no audio.
Setup Use Troubleshooting
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired or wireless network connection is removed for
more than 60 minutes in "Quick Start Mode". The front panel LED will
turn off during Deep Standby.
Press any button to turn the power on.
0 You also press the 13 button for 5 seconds, the device enters the Deep
Standby.
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
50
Status LED Appendix