Quick Select Function - Denon HOME 250 Owner's Manual

Contents

Quick Select function

Input source settings can be registered to the Quick select buttons (1 - 3).
1
To register the current settings, press and hold down one of the Quick Select buttons (1 - 3) on the top panel for 3
seconds.
0 The status LED blinks once when registration is complete.
0 To recall the registered settings, press the Quick Select button on the top panel.
Setup Use
Button
Quick Select 1
Quick Select 2
Quick Select 3
Troubleshooting
[Default settings]
18
Status LED Appendix
Input source
AUX In
－
－