Power Management - Denon HEOS 3 HS2 Owner's Manual

Contents

Power management

Power modes
o Quick Start Mode
To save power, the device will automatically enter "Quick Start Mode"
whenever there is no network access or playback for 20 minutes and
will automatically resume to full power whenever the device is selected
and playing music.
Setup Use Troubleshooting
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired or wireless network connection is removed for
more than 60 minutes in "Quick Start Mode". The front panel LED will
turn off during Deep Standby. To "wake" a HEOS device from Deep
Standby, you must press the volume or mute buttons which will
immediately turn on the front panel LED.
Also push the mute button for 3 seconds, the device enters the Deep
Standby.
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
48
Status LED Appendix