RECORDING (CONTINUED)
ALARM RECORD
Apply alarm signals to the signal input terminal at the rear panel to enable alarm recording.
ALARM SET INPUT
6H-960H
RECORDING
NORMAL mode
*
Set the alarm recording mode and alarm recording period in the ALARM SETUP screen.
*
An index signal is automatically recorded when alarm recording begins.
If Buzzer is set to ON in the ALARM SETUP screen, the buzzer sounds during the alarm record period.
*
If another alarm signal is received by the SET terminal while the VCR is recording in the alarm mode, it will not trigger a new
alarm recording.
NOTE:
*
The buzzer can be turned off by pressing the CLEAR BUZZER OFF button once.
*
The alarm record mode can be turned off by holding the CLEAR BUZZER OFF button for 3 seconds.
+
AUDIO RECORD CONNECTION
RS232C
RESET
6H-30H
6H-960H
ALARM
RECORDING
RECORDING
ALARM mode
NORMAL mode
GROUND
ALARM SIGNAL
AUDIO
IN
GND IN OUT
IN OUT TRIG
TAPE
1SHOT
OUT
END
REC
OUT
ALARM
LINK
MIC IN
* 6H, 18H and 30H record modes are available
for alarm record.
* Remote alarms can be configured to
VIDEO
sound a buzzer at the VCR by connecting
IN
external alarm signals to the ALARM IN and GND
terminals.
OUT
15