Vibration Damping System - Husqvarna T425 Workshop Manual

Repair instructions

7.18 Vibration damping system

Dismantling
1. Dismantle the following parts:
• Chain and bar. See the Operator's Manual.
• Airfi lter cover. See the Operator's Manual.
• Tank unit and handle.
2. Dismantle the vibration damping springs on the
starter housing using a 4 mm Allen key (see
fi gure 61).
3. Dismantle the vibration damping springs on the
tank unit and handle using a 4 mm Allen key
(tool 502 50 18-01)
(see fi gure 61 and page 43 fi gure 51).
Cleaning and checking
Clean and inspect all parts.
Assembly
1. Fit the vibration damping springs on the
cylinder using a 4 mm Allen key (tool 502 50
18-01).
2. Assemble the following parts:
• Tank unit and handle.
• Airfi lter cover. See the Operator's Manual.
• Chain and bar. See the Operator's Manual.
46
- English
Fig 61
Fig 62