Husqvarna T425 Workshop Manual page 19

4
Insert the screwdriver into the end of the spring
and press the spring together while pushing it
down with the fi nger.
5
Hold the spring in place with the fi nger and remove
the screwdriver. Insert the screwdriver straight
from above and press down until the spring catch-
es against the cut-out edge.
6
Bend the screwdriver away from the spring so that
the spring is pressed together and slips down to
the bottom.
7
Fit and tighten the cover.
8
Clamp the brake by moving the handle backwards
(see fi gure 15).
Fig 11
Fig 12
Fig 13
Fig 14
Fig 15
Safety equipment
19
English -