Removing/Replacing Torch Head And Switch From Service Line - ESAB PT-32 Instruction Manual

SECTION 3
3.3 REMOVING / REPLACING TORCH HEAD
AND SWITCH FROM SERVICE LINE
3.1 Slide back the flex support to the end of the Handle.
HANDLE
3.2 Slide Switch and Switch Band to end of handle. If
the switch is to be replaced, remove switch from
switch band and snip leads (2) at the spliced
connections. (Replacement switches are supplied
with new splices and extra long leads)
SWITCH BAND
3.3 Carefully slide the handle back from the torch body
to expose the cable and hose connections.
FLEX SUPPORT
SERVICE LINE ASSEMBLY
SPLICE CONNECTIONS
SWITCH BAND
3.4 Remove the power cable from the Torch Head by
using two wrenches to prevent twisting brass tube.
TORCH HEAD
3.5 Remove the Pilot Arc connection from the Torch
Head using two wrenches to prevent twisting stain-
less steel tube.
PILOT ARC
CONNECTION
13
MAINTENANCE
POWER CABLE
HANDLE