Replacement Parts; General - ESAB PT-32 Instruction Manual

SECTION 4

4.1 General

Replacement parts are illustrated on the following fig-
ures. When ordering replacement parts, order by part
number and part name, as listed. Always provide the
series or serial number of the unit on which the parts will
be used. The serial number is stamped on the unit
nameplate.
The "A" edition of this book adds a Cutting Speed Chart for 40Amp Current; updates the Optional Equipment list
on page 9 and revises the assembly instructions on page 11.
The "B" edition of this book changes part number for the torch body and handle.
Replacement parts may be ordered from your ESAB
distributor or from:
ESAB Welding & Cutting Products
Attn.: Customer Service Dept.
PO Box 100545, Ebenezer Road
Florence, SC, 29501-0545
Refer to the Communication Guide located on the last
page of this manual for a list of customer service phone
numbers.
Revision History
14

REPLACEMENT PARTS