Driver Specification; Hard Drives; Ssds; Optical Drive - Dell PowerEdge M630p Owner's Manual

Driver specification

Hard drives

ThePowerEdge M630p system supports:
• Up to two 2.5-inch, hot-swappable SAS, SATA hard drives or SAS or SATA or PCIe SSDs

SSDs

The PowerEdge M630p system supports:
• Up to four 1.8-inch, hot-swappable SATA SSDs

Optical drive

The PowerEdge M630p system supports external optional USB DVD and one optional SATA DVD-ROM drive or DVD+/-RW drive.

Flash drive

The PowerEdge M630p system supports internal optional USB, internal optional SD card and optional vFlash card (with integrated
iDRAC8 Enterprise).

Ports and connectors specifications

USB ports

The PowerEdge M630p system supports:
• One USB 2.0-compliant and one USB 3.0-compliant port on the front panel
• Internal USB 2.0-compliant port
The following table provides more information about the USB specifications:
Table 10. USB specifications
System
PowerEdge M630p

Internal Dual SD Module

The PowerEdge M630p system supports two SD card slots and a USB interface dedicated for the embedded hypervisor. This card offers
the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both slots and provides redundancy.
• Single card operation — single card operation is supported, but without redundancy.

Video specifications

The PowerEdge M630p system supports Matrox G200 VGA controller integrated with iDRAC and 2 GB shared with iDRAC application
memory.
Front panel
One 4-pin, USB 2.0-compliant and one 4-
pin, USB 3.0-compliant
Internal
• Two internal SD cards dedicated for the
hypervisor
• One SD card dedicated for future
vFlash support
Technical specifications 17