Environmental Specifications - Dell PowerEdge M630p Owner's Manual

Environmental specifications

NOTE: For additional information about environmental measurements for specific system configurations, see Dell.com/
environmental_datasheets.
Table 11. Temperature specifications
Temperature
Storage
Continuous operation (for altitude less than 950 m or 3117 ft)
Fresh air
Maximum temperature gradient (operating and storage)
Table 12. Relative humidity specifications
Relative humidity
Storage
Operating
Table 13. Maximum vibration specifications
Maximum vibration
Operating
Storage
Table 14. Maximum shock specifications
Maximum shock
Operating
Storage
Table 15. Maximum altitude specifications
Maximum altitude
Operating
Storage
Table 16. Operating temperature derating specifications
Temperature
Up to 35 °C (95 °F)
35 °C to 40 °C (95 °F to 104 °F)
18 Technical specifications
Specifications
–40°C to 65°C (–40°F to 149°F)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the
equipment.
For information about fresh air, see Expanded Operating
Temperature section.
20°C/h (36°F/h)
Specifications
5% to 95% RH with 33°C (91°F) maximum dew point.
Atmosphere must be noncondensing always.
10% to 80% Relative Humidity with 29°C (84.2°F) maximum dew
point.
Specifications
0.26 Grms at 5 Hz to 350 Hz (all operation orientations).
1.88 Grms at 10 Hz to 500 Hz for 15 min (all six sides tested).
Specifications
Six consecutively run shock pulses in the positive and negative x, y,
and z axes of 40 G for up to 2.3 ms.
Six consecutively run shock pulses in the positive and negative x, y,
and z axes (one pulse on each side of the system) of 71 G for up to
2 ms.
Specifications
3048 m (10,000 ft).
12,000 m (39,370 ft).
Specifications
Maximum temperature is reduced by 1°C/300 m (1°F/547 ft)
above 950 m (3,117 ft).
Maximum temperature is reduced by 1°C/175 m (1°F/319 ft)
above 950 m (3,117 ft).