Power-Button Assembly; Removing The Power-Button Assembly - Dell Alienware m17 R3 Service Manual

Steps
1. Place the power-adapter port into the slot on the palm-rest assembly.
2. Place the power-adapter port bracket on the power-adapter port.
3. Replace the two screws (M2x3) that secure the power-adapter port bracket to the palm-rest assembly.
Next steps
1. Follow step 3 to step 22 in installing the
2. Install the battery.
3. Install the rear I/O-cover.
4. Install the 2280 solid-state drive in M.2 slot
5. Install the 2230 solid-state drive in M.2 slot
6. Install the 2280 solid-state drive in M.2 slot
7. Install the 2230 solid-state drive in M.2 slot
8. Install the base cover.
9. Follow the procedure in

Power-button assembly

Removing the power-button assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 2230 solid-state drive in M.2 slot
4. Remove the 2280 solid-state drive in M.2 slot
5. Remove the 2230 solid-state drive in M.2 slot
6. Remove the 2280 solid-state drive in M.2 slot
7. Remove the rear I/O-cover.
8. Remove the battery.
9. Remove the right I/O-board.
10. Follow step 1 to step 21 in removing the
56
system board.
two, if installed.
two, if installed.
one, if installed.
one, if installed.
After working inside your
Before working inside your
one, if installed.
one, if installed.
two, if installed.
two, if installed.
system board.
computer.
computer.