Keyboard; Removing The Keyboard - Dell Alienware m17 R3 Service Manual

Steps
1. Place the power-button assembly and its cable in the slot on the palm-rest assembly.
2. Place the power-button bracket on the power-button assembly.
3. Replace the two (M2x1.9) screws that secure the power-button bracket to the palm-rest assembly.
Next steps
1. Follow step 3 to step 22 in installing the
2. Install the right I/O-board.
3. Install the battery.
4. Install the rear I/O-cover.
5. Install the 2280 solid-state drive in M.2 slot
6. Install the 2230 solid-state drive in M.2 slot
7. Install the 2280 solid-state drive in M.2 slot
8. Install the 2230 solid-state drive in M.2 slot
9. Install the base cover.
10. Follow the procedure in

Keyboard

Removing the keyboard

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 2230 solid-state drive in M.2 slot
4. Remove the 2280 solid-state drive in M.2 slot
5. Remove the 2230 solid-state drive in M.2 slot
6. Remove the 2280 solid-state drive in M.2 slot
7. Remove the rear I/O-cover.
8. Remove the battery.
9. Remove the right I/O-board.
58
system board.
two, if installed.
two, if installed.
one, if installed.
one, if installed.
After working inside your
Before working inside your
one, if installed.
one, if installed.
two, if installed.
two, if installed.
computer.
computer.