Removing And Installing Parts Of The Injection System - Skoda Octavia 1997 Workshop Manual

Octavia 1997 1.6 l/75 kW Engine, Fuel Injection and Ignition System

Removing and installing parts of the injection system

Note
Components marked with an * are tested by self-diagnosis µ Chap. 01-1.
1 - Air filter
K disassembling and assem-
bling µ 24-1 page 9
2 - 6 Nm
3 - 10 Nm
4 - 3 Nm
5 - Bottom part of intake mani-
fold
6 - Feed line
K white
K secured with spring strap clip
K from fuel filter µ 1.6 l/75 En-
gine, Mechanical Compo-
nents; Rep. Gr. 20
7 - Return-flow line
K blue
K secured with spring strap clip
K to fuel delivery unit in fuel
tank µ 1.6 l/75 kW Engine,
Mechanical Components;
Rep. Gr. 20
8 - Fuel rail with injection valves
K disassembling and assem-
bling µ 24-1 page 7
9 - 3-pin plug connection
K for engines with engine code
AVU
K black
K for camshaft position sensor
-G163-
10 - 15 Nm
11 - Connector
K for coolant temperature sender -G62-
K 4-pin
K black
K contacts gold-plated
12 - coolant temperature sender -G62-*
K green
K with coolant temperature sender -G2-
K resistances µ 24-1 page 10
K before removing, reduce pressure in cooling system if necessary
13 - O-ring
K replace if damaged
14 - Retaining clip
K check tightness
15 - Gasket ring
K replace
16 - Connector
K black, 2 pin
Edition 10.04
S00.5135.52.20
Fuel Injection System
24
24-1 5
page