Generating Readiness Code - Skoda Octavia 1997 Workshop Manual

01
Meaning of the 8-digit numerical block of the readiness code
X X X X
0
0
0
0

Generating readiness code

Special tools, test and measuring equipment and
auxiliary items required
Vehicle system tester -V.A.G 1552-
♦
Diagnostic cable -V.A.G 1551/3, 3A, 3B oder 3C-
♦
Test conditions
•
Vehicle stopped.
•
All electrical components such as lights and rear win-
dow heater must be switched off.
•
On vehicles with an automatic gearbox the selector le-
ver must be in position „P" or „N".
•
The coolant temperature must be at least 80°C
µ display group 004, display field 3.
The intake air temperature must be below 60 °C µ
•
display group 004, display field 4.
Procedure
–
Connect vehicle system tester -V.A.G 1552-. Start en-
gine and select „address word" 01 Engine electronics
µ Chapter 01-1.
Work step 1: Interrogating fault memory
–
Enter address word
and confirm with .
Q
The number of stored faults or „No fault recognised" ap-
pears in the display.
If a fault is stored in the memory:
–
Rectify the faults by referring to the fault table
µ Chapter 01-2 and 01-3.
If no fault is stored:
–
Press .
01-4 2
page
Octavia 1997
X X X X
0
0
0
0
„Interrogate fault memory"
0 2
1.6 l/75 kW Engine, Fuel Injection and Ignition System
Checked system
Exhaust gas recirculation
Lambda probe heater
Lambda probes
Air conditioning (no diagnosis at present/always 0)
Secondary air system
Activated charcoal filter (tank vent system)
Catalytic converter heater (no diagnosis at present/always 0)
Catalytic converter
X faults detected
Self-diagnosis IV Edition 10.04
S00.5135.52.20