Porsche 911 Manual page 95

The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. If cruise control is not already selected, select CC
using the rotary push button on the steering
wheel and press to confirm.
Cruise control is switched on and passive.
The operating status appears grey in the status
display. There is no speed stored.
Switching from an already activated driver assis-
tance system to cruise control
b b Vehicles with button S on the control stalk.
1. Press button S on the control stalk.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. Select CC using the rotary push button on the
steering wheel and press to confirm.
Cruise control is switched on and passive.
The operating status appears grey in the status
display. There is no speed stored.
Information
The last selected driver assistance system is re-
tained even after switching it off and operational
readiness is restored.
Switching cruise control off
e Press button R on the control stalk.
The memory is cleared and the readiness symbol
disappears.
Activating cruise control
b b Cruise control switched on.
b b Speed is higher than 30 km/h (20 mph).
1. Accelerate or decelerate to the desired speed
using the accelerator pedal.
2. Briefly press the control stalk forward (position
1) and release the accelerator pedal.
Cruise control is active.
The current driving speed appears green in the
status display and is maintained automatically.
Changing the desired speed
The desired speed can be increased or decreased by
pressing the control stalk.
b b Cruise control active.
Increasing the speed
e Press the control stalk forward (position 1):
– Brief press = 1 km/h (1 mph) increments
– Press and hold = 10 km/h (6 mph)
increments
Reduce speed
e Pull the control stalk (position 2):
– Brief pull = 1 km/h (1 mph) increments
– Pull and hold = 10 km/h (6 mph) increments
The new desired speed is displayed on the instru-
ment cluster.
Information
The speed can be increased using the accelerator
pedal as usual. This does not change the stored val-
ue; it is resumed after the accelerator pedal is
released.
Cancel cruise control operation –
CANCEL
Following deactivation, cruise control switches to
standby mode and remains in standby until it is ac-
tivated manually again.
Cruise control (CC)
e Press the control stalk downwards (position 4,
CANCEL).
– or –
e Press brake pedal
– or –
e Press the clutch pedal for longer than approx.
7 seconds (vehicles with manual transmission).
– or –
e Move selector lever to operating mode N (ve-
hicles with PDK).
Cruise control is passive. The set value for the
desired speed remains stored. The status display
changes from green to grey.
Cruise control operation is interrupted auto-
matically in the following situations:
– The vehicle speed is above or below the set
speed for a certain time.
– Porsche Stability Management (PSM) is active.
Resuming the stored speed –
RESUME
e Press the control stalk upwards (position 3,
RESUME).
Cruise control accelerates or brakes the vehicle
to the stored speed.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
93