Windows - Porsche 911 Manual

Windows

Opening and closing windows
Opening and closing the
WARNING
windows
When opening or closing the windows, particularly in
one-touch mode, parts of the body may get trapped
between the moving window and fixed vehicle parts.
e When opening and closing the windows, make
sure that no parts of the body can become trap-
ped between the moving window and fixed ve-
hicle parts.
e Always switch off the ignition when leaving the
vehicle. Uninformed persons could injure them-
selves by operating the power windows.
e In the event of danger, immediately release the
button on the driver's key or the proximity sensor
in the door handle on vehicles with Comfort
Access.
e Do not leave children in the vehicle unattended.
Closing a side window
WARNING
manually
If one-touch operation has been disabled following
blockage of a side window, the side window shuts
with its full closing force during manual closing.
Parts of the body that become trapped between the
moving side window and fixed vehicle parts may be
crushed.
e Make sure that nobody is trapped or crushed
when closing the side windows.
Information
If a side window is blocked by an object during
closing, it will stop and open again by several
centimetres.
If the side window is blocked a second time within
approx. 10 seconds, one-touch operation will be
disabled for this window. The side window can be
closed manually. One-touch operation is enabled
again once the side window has been closed com-
pletely using the manual closing function.
Opening and closing windows
b b Ignition switched on.
– or –
b b Ignition is switched off, but not for longer than
10 minutes.
b b Driver's or passenger's door not yet opened.
Fig. 221: Power window buttons in driver's door
A Power windows, driver's side
B Power windows, passenger's side
C Switching between front/rear windows (Cabriolet)
The rocker switches have a two-stage function.
When actuating the buttons, both positions can be
clearly felt through resistance when pulling or
pressing.
Stage one – manual operation
e Press or pull the relevant rocker switch to the
first setting until the desired position is reached.
The process stops when the switch is released.
Stage two – automatic operation
e Briefly push or pull the relevant rocker switch all
the way to the second setting.
The window opens or closes automatically to the
end position.
e Actuate the button again to stop the window at
the desired position.
Windows
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
273