Slide/Tilt Roof - Porsche 911 Manual

Slide/Tilt Roof

Slide/Tilt Roof
A
B
Opening and closing slide/tilt roof
C
Opening and closing the
WARNING
D
slide/tilt roof and sun
blind
E
When opening or closing the slide/tilt roof or sun
F
blind, particularly in one-touch operation, parts of
G
the body may get trapped between moving and fixed
vehicle parts.
H
e Ensure that nobody is injured when the slide/tilt
I
roof or sun blind is operated.
e Always switch off the ignition when leaving the
J
vehicle. Always take the driver's key with you
K
when leaving the vehicle. Uninformed persons (e.
L
g. children) could injure themselves by operating
the slide/tilt roof or sun blind.
M
e In case of danger, press the slide/tilt roof or sun
N
blind buttons, or when opening or locking the
vehicle, release the buttons on the driver's key
O
immediately.
P
Q
NOTICE
R
Damage to the roof or the load, if the slide/tilt roof is
S
opened or lifted when a roof transport system is
fitted.
T
e Do not open or lift the slide/tilt roof when a roof
U
transport system is fitted.
V
W
X
Y
Z
206
Information
– The slide/tilt roof and sun blind have a force
limiter. If they are obstructed during the closing
operation, they will open again immediately.
– The slide/tilt roof does not function at extremely
high vehicle speeds or at extremely low
temperatures.
Operating the slide/tilt roof and sun blind
b b Ignition switched on.
– or –
Ignition switched off (for not longer than 10 mi-
nutes) and driver's or passenger's door not yet
opened.
The buttons for opening and closing the slide/tilt
roof and sun blind have a two-stage function. When
actuating the buttons, both positions can be clearly
felt through resistance when pulling or pressing.
Opening the steel slide/tilt roof
Fig. 179: Operating steel slide/tilt roof
A Opening slide/tilt roof
B Lifting/lowering slide/tilt roof
C Closing slide/tilt roof
First setting – manual operation
e Pull and hold button A in the first setting until
the desired position is reached.
The process stops when the switch is released.
Second setting – one-touch operation
e Briefly pull button A to the second setting.
The slide/tilt roof opens automatically to the end
position.
e To interrupt the process, pull button A or C again.