Table of Contents
Advertisement
2
1
Figure 16
1. Assembly nozzle bulkhead 2. 90° fitting
5. Move to the forward hole in the tank.
6. Install a nozzle assembly up through the drilled hole
(Figure
17).
1
Figure 17
1. Plastic flange nut
2. Gasket
7. Install the gasket and plastic flange nut over the
exposed threads of the bulkhead on top the tank
(Figure
17). Ensure that the seal is seated correctly
between the plastic nut and the tank surface.
8. Install the 90° fitting into the threaded opening of the
rinse-nozzle bulkhead
G014247
2
3
4
G014249
3. Hole (previously drilled)
4. Rinse-nozzle assembly
(Figure
18).
1
1. Assembly nozzle bulkhead 2. 90° fitting
9. Align the hose barb of the 90° fittings to the right side
of the machine.
5
Installing the Rinse-Tank
Pump
Parts needed for this procedure:
1
Rinse-tank pump
2
Straight fittings
Procedure
1. Assemble the rinse-tank pump to the tank frame on
the platform at the rear right side of the main tank as
shown in
Figure
G014251
1. Bolt
2. Washer
3. Rinse-tank pump
2. Secure the rinse-tank pump to the frame using 4 bolts,
4 washers, and 4 locknuts
8
2
G014250
Figure 18
19.
1
2
3
4
5
Figure 19
4. Tank frame
5. Locknut
(Figure
19).
Advertisement
Table of Contents
