Maintenance
Inspect the Filter
Service Interval: After the first 5 hours
Every 50 hours
Check the filter for any signs of damage. Replace the filter
if it is damaged.
Inspecting the Rinse System
for Leaks and Damage
Service Interval: Before each use or daily—Inspect the
hoses for leaks.
After the first 5 hours—Inspect hoses for damage.
Every 100 hours—Inspect hoses and O-rings for
damage
Contact your Authorized Toro Dealer to obtain replacement
parts.
Inspecting the Rinse-Tank
Straps
Service Interval: After the first hour—Check the rinse-tank
straps.
Once the main tank has been filled with water, check to see
if there is any play in the tank straps. If the straps are loose,
tighten the fasteners at the top straps until they are flush with
tank. Do not over tighten.
Important: Over-tightening the tank strap fasteners
can deform and damage the straps.
Storage
Storing the Machine for up
to 30 days in Above Freezing
Temperatures
Drain the following components:
•
Pump-inlet line
•
Pump-outlet line
•
Filter line
Storing the Machine During
Freezing Temperatures or for
More Than 30 days
Before storing the machine, perform the following:
1. Add RV anti-freeze solution into the rinse tank.
2. Circulate the anti-freeze through rinse pump.
When retuning the machine to service, drain the following
components:
•
Pump-inlet line
•
Pump-outlet line
•
Filter line
16