Table of Contents
Advertisement
Figure 27
2015 Machines
1. Fuse block
2. Fuse (40 A)
3. Bolt and nut (electrical
panel)
4. 2-pin connector (delay
timer)
5. 2-socket connector
(machine wire harness)
6. Flange-head bolt (#10-24
x 1/2 inch)
7. Locknut (#10–24)
8. 5-socket connector
(machine wire harness)
9. Relay
10. 4-socket connector
(machine wire harness)
11. Power relay
2016 and After Machines
1. Fuse (40 A)
2. Fuse block
3. Locknut (#10-24)
4. Electrical panel
3. Install a fuse (40 A) to the open slot in the fuse block
as shown in
Figure
Note: If a lower amperage fuse already exists in the
slot, replace it with the fuse (40 A).
4. Locate relay and power relay in line with the other relays
of the same style, and mount them to the panel
26,
Figure
27, or
bolts (#10-24 x 1/2 inch) and 2 locknut (#10-24).
5. Locate the 4-socket connector and the 5-socket
connector on the main harness and connect them to
the relay (4-pin) and power relay (5-pin) as shown in
Figure
26,
Figure
12
Figure 28
5. Flange-head bolt (#10-24
x 1/2 inch)
6. 4-socket connector
(machine wire harness)
7. Relay
26,
Figure
27, or
Figure
Figure
28) with the 2 flange-head
27, or
Figure
28.
28.
(Figure
Advertisement
Table of Contents
