Advanced' Settings - ViewSonic WPG-360 User Manual

4-5-2 'Advanced' Settings

Display and configures the advanced settings.
Item
Fragment
Threshold
RTS Threshold
Beacon Interval
DTIM Period
Data Rate
N Data Rate
Channel Width
Preamble Type
Broadcast Device
Name (SSID)
CTS Protect
ViewSonic WPG-360
Description
Set the Fragment threshold of wireless radio.
Default value is 2346.
Set the RTS threshold of wireless radio. Default value is 2347.
Set the beacon interval of wireless radio. Default value is 100.
Set the DTIM period of wireless radio. Default value is 3.
Change data transfer rate. Default value is 'Auto' and it's
recommended to use default setting.
Same as above, but only for 802.11n clients.
Set channel width of wireless radio. Default setting is 'Auto 20/40
MHz'.
Set the type of preamble of wireless radio, Default setting is 'Short
Preamble'.
Decide if the product will broadcast its own device name or not. You
can hide the device name of this product (set the option to 'Disable')
Enable to reduce the chance of radio signal collisions between
802.11b and 802.11g wireless access points. It's recommended to
30