Chapter Iv Configure Wpg; Conference Control - ViewSonic WPG-360 User Manual

Chapter IV Configure WPG

4-1 Conference Control

When there is more than one presentation login to WPG, you can control the content from
different presenter via Conference Control webpage.
NOTE:
‧ When "Administrator Mode" is enabled, all buttons of the application software will be
disabled.
ViewSonic WPG-360
Use the web browser to connect to
the IP address of WPG (Wireless /
Wired IP address). WPG's IP
address can be found at the
lower-left corner of Instruction page
(refer to chapter 2-1).
Click 'Conference Control' from
WPG's web user interface.
All users currently logged in will be
displayed here. To select a user's
display content in certain area of
Quarter-Split Display, click number 1
to 4; to display in full-screen, click
button of the presenting user. To
stop a progressing presentation,
click
23