Table of Contents
Advertisement
Quick Links
ViewStick 2
Wireless Presentation Gateway
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. "Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual"
Model No. VS16704
Advertisement
Table of Contents
Related Manuals for ViewSonic viewstick 2
Summary of Contents for ViewSonic viewstick 2
-
Page 1: User Guide
Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. - Page 2 At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well. Once again, thank you for choosing ViewSonic !
-
Page 3: Compliance Information
Compliance Information Please read before proceeding • Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized accessories may void your warranty. • Do not store your device in temperatures higher than 50°C (122°F). • The operating temperature for this device is from 0°C (32°F) to 35°C (95°F). FCC Notice The following statement applies to all products that have received FCC approval. -
Page 4: Fcc Sar Information
FCC SAR Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. -
Page 5: Declaration Of Rohs2 Compliance
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance... -
Page 6: Copyright Information
Serial Number: Purchase Date: Product disposal at end of product life ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more. USA & Canada: http://www.viewsonic.com/company/green/recycle-program/ Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/... -
Page 7: Table Of Contents
Chapter 1: Product Introduction 1-1 Package Contents ...................1 1-2 Hardware Recommendation................2 1-3 Highlights......................2 1-4 Hardware Setup/Installation ................3 Chapter 2: ViewStick 2 administration setting 2-1 Connect to Web Configuration Menu ..............4 2-2 Status & Info ....................5 2-3 Wireless Settings.....................6 2-4 WiFi connection setting ...................9 2-5 Projection Setting ..................10... - Page 8 3-4 Moderator Mode ....................26 FAQ: ........................27 Windows 7 ......................28 Windows 8 ......................31 Chapter 4: Using ViewStick 2 on Mobile, Mobile APP Chapter 5: Play media by USB Appendix A: Support resolution Appendex B: ViewStick 2 Support Media Format Customer Support...
-
Page 9: Chapter 1: Product Introduction
Chapter 1: Product Introduction Congratulations on your purchase of ViewSonic Wireless Presentation Gateway ViewStick 2. This section introduces you to the ViewStick 2 (referred to as the ViewStick 2 in this user guide). 1-1 Package Contents ViewStick 2 USB Y Cable... -
Page 10: Hardware Recommendation
ViewStick 2 supports real time WiFi Projection, play back functions. 1. WiFi Presentation Mode (HDMI) ViewStick 2 is designed to able to stream contents from PC (Windows 7 / Window 8 / Windows 10 / Mac OS X 10.7/10.8/10.9/10.10/10.11) and Mobile (iOS 8 or later / Android 5.0 or later) to your HDMI support Display through this... -
Page 11: Hardware Setup/Installation
1-4 Hardware Setup/Installation 1. Front HDMI (Internal Micro USB) 2. Back HDMI (USB Y Cable) -
Page 12: Chapter 2: Viewstick 2 Administration Setting
Chapter 2: ViewStick 2 administration setting 2-1 Connect to Web Configuration Menu Please key IP address in browser, default is 192.168.59.254, The basic standby screen shows IP information Default pass word is “admin”. Item Description Application download Download application Remark: AutoProject key software download only for Client mode setting download link is: "http://www.viewsonicglobal.com/vsweb.us/viewsync_... -
Page 13: Status & Info
2-2 Status & Info Displays system information, like system software version and IP address. Many useful information can be obtained here when you need help about system configuration and firmware upgrade. -
Page 14: Wireless Settings
Device Name Input the Device Name of presentation gateway here. (SSID) "ViewStick 2 XXX", XXX would be different from every upgrade.”. Click ‘Apply’ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection. - Page 15 “Security” Setting Encryption: Disabled Disables wireless encryption. Encryption: WPA +WPA2 Enable WPA + WPA2 encryption. Wireless clients must support WPA encryption and know the encryption passphrase you set here. NOTE: When the configuration settings are changed, you must restart the network connection.
- Page 16 Band Setting Item Description Band Select the wireless band. Available options are: 2.4GHz (B+G+N) - 802.11b, 802.11g, and 802.11n clients. 2.4G Channel Auto,1,6,11...
-
Page 17: Wifi Connection Setting
2-4 WiFi connection setting If setup WiFi connection successful, ViewStick 2 will become WiFi Client mode. Your PC or phone need to link the same WiFi AP router for WiFi projection or media streaming. -
Page 18: Projection Setting
2-5 Projection Setting Displays and configures the projection setting. Item Description OSD Menu Language Select the displaying language. Selection HDMI Output Select HDMI output resolution for projection. Resolution VGA Output No VGA output on this device. Resolution Login Code Enable /disable Login code request User can interrupt and replace the current presenter by play Over write another transmitter. -
Page 19: Password Setting
2-6 Password Setting Displays and configures the password setting. Item Description Current Password Input current password here. Default pass word is “admin”. New Password: Enter new password. New Password / Confirmed Password Confirmed Password: Enter new password again. Click ‘Apply’ button to save the settings. NOTE: When the configuration settings are changed, you must restart the network connection. -
Page 20: Firmware Upgrade
2-7 Firmware Upgrade Select ‘Firmware download’, ViewStick 2 will check and download the latest firmware automatically once ViewStick 2 connects to Internet. Select 'On-lin Upgrade', ViewStick 2 will check and upgrade latest firmware automatically once ViewStick 2 connects to Internet. -
Page 21: Restart
2-8 Restart Restart ViewStick 2 when the device is not working properly or to apply changes made on web configuration menu. Click ‘OK’ to restart the ViewStick 2, or click ‘Cancel’ to abort. 2-9 Logout If you wish to logout from web configuration menu, click ‘Sign Out’. -
Page 22: Osd Menu
2-10 OSD Menu Click “Web Page” in software menu. Click “Remote Control” on web configuration menu and will show below virtual remote control on the web page. - Page 23 Click “Setting ICON” on virtual remote page and will show below menu on the screen.
-
Page 24: Network Setting
Overwrite overwrite is enable, if you are presenting, you can be relabceable by other person. Device Name Item Description Input the Device Name of presentation gateway here. Device Name (SSID) "ViewStick 2 XXX", XXX would be different from every upgrade. - Page 25 WiFi Connection Click WiFi connection button. Then there will show the Wireless AP list on the screen. Please choose the AP you want to connect. The function is to Connect to Internet via another Wireless AP. Virtual AP Setup Item Description Open System Disables wireless encryption.
- Page 26 Network setting AP Mode • Default setting, after factory reset will return to AP mode. • User WiFi direct link to ViewStick 2, no internet access) • Performance is better than Client mode. Client mode by WiFi • Setting WiFi Connection on Menu, Web Page -->...
- Page 27 Audio Setting You can adjust the advanced audio setting such as Night mode, HDMI Audio output format, SPDIF output format, Surround sound setting and Lip Sync setting in this page. Video Setting You can adjust Aspect Ratio, TV out video format, and other video setting in the video setup page.
- Page 28 USB Upgrade Name image file as "install.img" Place install.img in UFD Plug UFD into ViewStick 2 with Y Cable Choose USB Upgrade Online Upgrade Connect ViewStick 2 to internet Online Upgrade will check latest version and auto download and upgrade.
-
Page 29: Chapter 3: Computer Projection
Chapter 3: Computer Projection 3-1 Download & Install Download Software from ViewStick 2 website 1.1 Link to vsweb.us/viewstick2 1.2 Download software 1.3 Unzip install software follow instruction. -
Page 30: Connect To Viewstick 2
1.1.1 Select ViewStick 2 If ViewStick 2 has set WPA security, it is needed to key password on step If ViewStick 2 set Login code, it is needed to key Login code before Play to ViewStick 2 on step B 1.1.2 Next time, ViewStick 2 will be listed on Saved column, it will... - Page 31 If ViewStick 2 set Login code, it is needed to key Login code before Play to ViewStick 2 on step B 2.2 Next time, ViewStick 2 will be saved , it will auto select correct WiFi Router and link to ViewSync directly...
-
Page 32: Basic Mode
3-3 Basic Mode AutoProject software standby UI (1) Menu (2) Play/Pause (3) Stop (4) Enable Moderator (5) Annotator 1.1 Menu 1.1.1 Display Mode: Mirror Mode /Extend Mode 1.1.2 HDMI/VGA resolution 1.1.3 Aspect Ratio: Auto / 4:3 / 16:9 / 16:10 1.1.4 Web Page: Click will link to Web page setting... - Page 33 Software will remember setting. 1.1.5.3 USB Keyboard/Mouse Back control: For Mirror mode only, if Keyboard and Mouse plug in ViewStick 2 USB port. It can back control computer who has projected to ViewStick 2. 1.1.5.4 Enable Remote Cursor (Disable Computer Mouse cursor) ViewStick 2 will generate a virtual cursor to replace original Mouse cursor.
-
Page 34: Moderator Mode
3-4 Moderator Mode Moderator control by Software. • It is unavailable to launch moderator mode by connecting to ViewStick 2. -
Page 35: Faq
• If Laptop native resolution over 1920x1080, please select “Enable Auto Scale down” on software setting of Menu. 2. Question: when I install ViewStick 2 software, I meet the problem which show .Net Framework not ready Answer: please follow the below process to enable it. -
Page 36: Windows 7
Windows 7 How To Install Microsoft .NET Framework 3.5.1 on Windows 7 Microsoft .NET Framework version 3.5.1 is included with Windows 7. Follow the steps below to enable it. If you try to run .NET 3.5 installer downloaded from the Microsoft website on Window 7, you will receive the following error: You must use "Turn Windows features on or off"... - Page 37 2. Click Programs 3. Click Turn Windows features on or off 4. Click the checkbox next to Microsoft .NET Framework 3.5.1...
- Page 38 5. You will see the checkbox become filled 6. Click OK 7. Wait for Windows to complete the operation. If it asks you to connect to Windows Update to download required files, click Yes.
-
Page 39: Windows 8
Windows 8 How to enable .NET Framework 3.5 on Windows 8 in Offline Mode Problem Description Windows 8 does not include .NET 3.5 (include .NET 2.0 and 3.0) by default. But if the user is upgrading from Windows 7 to Windows 8, .NET Framework 3.5 is fully enabled. - Page 40 Step Click Turn Windows features on or off, and the user will see window as image below. The User can enable this feature by click on .NET Framework 3.5 (include .NET 2.0 and 3.0) select it and click OK. After this step, it will download the entire package from internet and install the .NET Framework 3.5 feature.
- Page 41 How To Do The following are the steps to enable .NET Framework 3.5 (include .NET 2.0 and 3.0) feature in offline mode : Step 1: Insert Windows 8 DVD or mount ISO image. The source of this feature can be found in folder E:\sources\sxs.
- Page 42 Step 3: Run the following command Dism.exe /online /enable-feature / featurename:NetFX3 /All /Source:E:\sources\sxs /LimitAccess, and hit Enter. After completing the installation of .NET Framework 3.5 you can see that the feature is enabled.
-
Page 43: Chapter 4: Using Viewstick 2 On Mobile, Mobile App
Chapter 4: Using ViewStick 2 on Mobile, Mobile APP AirPlay Connect WiFi to ViewStick 2. Refer to airplay rule from APPLE. https://support.apple.com/en-us/HT204289 Android OS requirement: 5.0 and above Download “AutoProject” app from Google Play Mirror your android mobile screen by following steps: 1. - Page 44 3. Find the name of ViewSync 3 Pro shown on your application 4. Select and key in login code if needed...
- Page 45 5. Application will auto close up and shown on the top bar...
- Page 46 6. Play/Stop or Exit. (picture 25,26)
- Page 47 iOS OS requirement: 8.0 and above Download “AutoProject” app from App Store Play your iPhone document screen by following steps: 1. Link WiFi to ViewSync 3 Pro or the same local area network of ViewSync 3 Pro 2. Run the application...
- Page 48 3. Find the name of ViewSync 3 Pro shown on your application of setting. Or select the document you want to play, then select the name of ViewSync 3 Pro.
- Page 49 4. Key in login code if needed 5. Play/Stop. -Browser -Document...
- Page 50 -Photo -Folder Selection...
-
Page 51: Chapter 5: Play Media By Usb
Chapter 5: Play media by USB • Plug in USB drive in to Y cable USB female • Open browser and connect to ViewStick 2 by IP • Use remote control under webpage, check page 14 • Select file • You can play Video, Photo or music that you select. -
Page 52: Appendix A: Support Resolution
Appendix A: Support resolution Interface Output resolution NTSC, PAL, 480p, 576p, 720p@50Hz, 720p@60Hz, HDMI 1080i@50Hz, 1080i@60hz, 1080p@50Hz, 1080p@60Hz Appendex B: ViewStick 2 Support Media Format Video Format Format File extension MPEG-1 mpg, mpeg MPEG-2 mpg, mpeg MPEG-TS m2t, tts MPEG-4... -
Page 53: Customer Support
Latin America C= http://www.viewsonic.com/ www.viewsonic.com/la/ soporte@viewsonic.com (Mexico) la/soporte/servicio-tecnico Nexus Hightech Solutions, Cincinnati #40 Desp. 1 Col. De los Deportes Mexico D.F. Tel: 55) 6547-6454 55)6547-6484 Other places please refer to http://www.viewsonic.com/la/soporte/servicio-tecnico#mexico Latin America C= http://www.viewsonic.com/ www.viewsonic.com/la/ soporte@viewsonic.com (Peru) la/soporte/servicio-tecnico Macau www.hk.viewsonic.com T= 853 2870 0303 service@hk.viewsonic.com... -
Page 54: Limited Warranty
® What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. - Page 55 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based...
- Page 56 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.
- Page 57 Tel: (52) 999-925-1916 Tel: 01(52)95-15-15-22-22 E-Mail: rrrb@sureste.com Fax: 01(52)95-15-13-67-00 E-Mail. gpotai2001@hotmail.com Tijuana: FOR USA SUPPORT: ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 14035 Pipeline Ave. Chino, CA 91710, USA Col 20 de Noviembre Tel: 800-688-6688 (English); 866-323-8056 (Spanish); Tijuana, Mexico E-Mail: http://www.viewsonic.com...