Windows Xp Ip Address Setup - ViewSonic WPG-360 User Manual

2-3-1 Windows XP IP address setup:

ViewSonic WPG-360
Click 'Start' from windows toolbar locate at
bottom, open control panel, then select Network
and Internet Connections, click Network
Connections, and then double-click Local Area
Connection, Local Area Connection Status
window will appear, and then click 'Properties'
Select 'Use the following IP address', then input
the following settings in respective field:
IP address: 192.168.0.x (where x is an integer
greater or less than 200, if there's more than
one computer need to use this WPG on the
same network, each computer should use an
unique number)
Subnet Mask: 255.255.255.0
Click 'OK' when finish.
12