Zte Glo Bolt MF60 User Manual page 5

3.WPS
4. OLED Screen
5. External An-
tenna Connector
6.Charger/USB
port
NOTES:
microSD logo

Hold the WPS and Power buttons simultaneously until the OLED screen

turns off, and then release the buttons. The device will restart automatically
and restore to the factory default settings.
This button is used to start/end Wi-Fi Protected Setup au-
thentication process and enable/disable the Wi-Fi function.
Hold it for 3 seconds to activate the WPS function.

When the WPS function is available, press it to deacti-

vate the WPS function.
Press it to enable/disable Wi-Fi function.

It indicates the signal type, signal strength, battery, Wi-Fi,
etc.
It is used to connect an external antenna to enhance the
signal strength.
Charge your device.

Connect the client to your device via USB cable.

is a trademark of SD Card Association.
3
Mobile WiFi Mobile WiFi