Operation - ViewSonic N3290W User Manual

Using the TV Features

Operation

Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front of
the panel.
Changing Channels
1. Using Channel Buttons
Press CH▼▲ button to change channels, and
the TV changes channels in sequence. You will
see all channels that have been memorized.
Channels erased or not memorized will not be
shown.
2. Using Number Buttons
(1)ATV
The "-" button has no function in ATV mode.
Directly press the number buttons to select
channels.
(2)DTV
Use "-" button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press "-" → press 3.
＊ Return to the previous channel, press LAST
button.
Adjusting the Volume
Press VOL▲/▼button to adjust volume.
To turn off the volume, press MUTE button.
To restore volume, press MUTE button again, or
press VOL▲/▼button directly.
Viewing the Displayed Information
To display the current information of the LCD TV:
Press INFO button, and the current state will be
displayed on the screen. (It shows all or some of
the information about Input, Channel, Resolution,
Audio Type, etc., depending on what input source
it is in)
Selecting the TV Signal Source
With the TV on, press SOURCE button on either
the TV or the remote to choose from:
TV, Composite Rear, Composite Side, S-Video
Rear, S-Video Side, Component 1, Component 2,
VGA, HDMI 1, HDMI 2, HDMI 3.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
22
N3290w