Related Manuals for ViewSonic VS12281-1A
Summary of Contents for ViewSonic VS12281-1A
- Page 1 ViewSonic N3290w N4290p N4790p LCD TV ViewSonic ® User Guide ® Model No. : VS12280-1A VS12281-1A VS12282-1A...
-
Page 2: Product Registration
Dear ViewSonic customer, Congratulations on your purchase of a ViewSonic TV display. For maximum benefit of your TV, please read these instructions before any operations. For assistance, please contact ViewSonic service team at http://www.viewsonic.com.au/support/ To purchase or inquire about any accessories and installation services you’re your TV, please visit http://www.viewsonic.com.au/ or call: Australia 1800 880 818. -
Page 3: Caution
Caution Please use the following ViewSonic TVs only with the following wall-mount kit. ViewSonic Wall-Mount kit model Use with other Wall-Mount kit may cause instability and possibly result in injury. To find the perfect mount for N4290p/N4790p, please browse http://www.viewsonic.com.au/ or call our service team: Australia 1800 880 818. -
Page 4: Compliance Information
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic Proposed Maximum Concentration 0.1% 0.1%... -
Page 5: Table Of Contents
Installing the LCD TV ... 8 Installing the Stand... 8 Disconnecting the Stand ... 8 Mounting ViewSonic LCD TV to the wall... 9 Wall Mount Kit Specifications (VESA)... 10 Front View of the Product... 11 Rear View of the Product ... 12 Side View of the Product ... -
Page 6: Warning
Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic Declaration of Conformity Trade Name: ViewSonic Model: N4290p/N4790p Responsible Party: ViewSonic Corporation Address: 381 Brea Canyon Road, Walnut, CA. -
Page 7: Important Safety
◊ When disconnecting the power cord, grasp the plug instead of pulling the power cord. ◊ Use only an original ViewSonic AC power cord, not other brands. ◊ Do not use the supplied AC power cord on any other equipment. - Page 8 Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic Antenna grounding according to the National Electrical Code, ANS/NFPA 70 should Electric service equipment Ground clamps...
-
Page 9: Carrying The Tv
◊ When lifting or moving the TV, hold it securely from the bottom. Place your palm directly under the panel. Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic VENTILATION Slots and openings in TV are provided for ventilation. - Page 10 TV. If water penetrates into the product, unplug the power cord and contact ViewSonic. Donot operate the TV. It may result in electric shock or damage to the TV. ◊ To prevent fire, keep flammable objects or open flame (e.g.
-
Page 11: Volume Adjustment
◊ Spraying insect repellent with volatile material on the screen will cause damage. ◊ Do not make prolonged contact with rubber or plastic material. Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic Broken pieces Do not throw anything at the TV. -
Page 12: Getting Started
Package Contents Please make sure the following items are included with your LCD TV. If any items are missing, please contact your dealer. LCD TV ViewSonic User Guide Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic Remote Control with batteries ViewSonic Quick Start Guide... -
Page 13: Installing The Lcd Tv
1. Place the TV face down on a soft cloth or cushion on a table. 2. Remove the base. It is attached to the stand with screws. 3. Remove the screws holding the stand to the hinge. 4. Remove the stand. Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic or call our service team:... -
Page 14: Mounting Viewsonic Lcd Tv To The Wall
Do not install in a moist or wet environment. This equipment is intended for indoor use. Do not install near heat source, or strong magnetic fields Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight Before attaching the wall mount plate to the back cover, ensure the product is working If your LCD TV is already set up for free-standing operation, you need to first... -
Page 15: Wall Mount Kit Specifications (Vesa)
N3290w Product Family inch LCD TV ViewSonic provides the standard dimensions for wall mount kits as shown in the table above When purchasing our wall mount kit, a detailed install manual and all parts necessary for assembly are provided. Do not use the screws that longer than the standard dimension, as they may cause damage to the inside of the TV set. -
Page 16: Front View Of The Product
SOURCE MENU PR ▼ PR ▲ VOL - VOL + Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic Description Receives IR signals from the remote control Lights up in blue when the TV is turned on. Lights up in red when the TV is in standby mode. -
Page 17: Rear View Of The Product
Composite Video output 10 Composite/ Audio output (left/ right) 11 PC Audio input 12 VGA signal input Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic Description Plug-in the supplied AC Power cord and connect to the AC input power source. Connect this port to the HDMI/HDMI-DVI jack of the compatible equipment. -
Page 18: Side View Of The Product
VCR or other video device that has S-Video. S-Video provides better picture quality than composite video connection. If both are connected, S-Video signal has priority. --- VIDEO: S-Video input [B] --- AUDIO: S-Video signal Audio input [D] Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic Description Connect this port to the HDMI/HDMI-DVI jack of the compatible equipment. - Page 19 Connect the VGA cable and Audio cable from the VGA signal input and PC Audio input to the corresponding ports on your A/V device. --- VIDEO: VGA signal input [12] --- AUDIO: PC Audio input [11] Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic DVI-to-HDMI cable...
-
Page 20: Connecting The Lcd Tv
For the optimum picture quality, be sure to connect this device to your TV via the HDMI or component video (with audio) input on the back of your LCD TV. Contact ViewSonic service team at: http://www.viewsonic.com.au/ ViewSonic... - Page 21 Getting Started ☼ If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI 1/2/3 jack [10] and connect the audio jack to the AUDIO In jacks [11], ViewSonic N3290w/N4290p/ N4790p...
-
Page 22: Personal Computer
• For the best picture quality, we recommend that you use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. • Remark “*.*” excludes N3290w. Full screen is 1366 x 768 for N3290w. ViewSonic Aspect Ratio Handling Compatiable FS*Full-Screen... -
Page 23: Other Equipment
Getting Started Other Equipment ☼ • Please refer to the Quick Start Guide (supplied) when connecting the other equipment to your LCD TV. ViewSonic N3290w/N4290p/ N4790p... -
Page 24: Using The Tv Features
Dispose of the battery in accordance with local laws and regulations. Keep the batteries away from children or pets. When the remote control will not to be used for an extended period, remove the batteries. ViewSonic N3290w/N4290p/ N4790p... -
Page 25: Remote Control And Tv Controls
Using the TV Features Remote Control and TV Controls ViewSonic Button Power Press this button to turn the power on from standby mode. Press it again to return to the standby mode. Picture To Select a predefined picture setting. Standard/ Vivid/ Personal/ Game/ Movie Aspect Change the aspect ratio. - Page 26 Using the TV Features ViewSonic Button Subtitle Press to select Off or On function of subtitle, when the input source is available for subtitle. Index Press to return to page 100 or the index page; and then press 0 to 9. The teletext page will be numbered and added to the page you select or the secondary item.
- Page 27 Using the TV Features ViewSonic Button Use below buttons when you play music or video file by USB device. (JPEG, BMP, PNG, MPEG1, MPEG2, MPEG4, MP3, M4A) Forward / Quick forward Search or select previous chapter or track. Backward / Slow backward Search or select next chapter or track.
-
Page 28: Operation
To display the current information of the LCD TV: Press Display button, and the current state will be displayed on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type, etc., depending on what input source it is in) ViewSonic N3290w/N4290p/ N4790p... - Page 29 Off, 10 min, 30 min, 60 min, 90 min, 120 min, 180 min, or 240min. To turn off the timer, please select Off. Viewing Subtitle To view Subtitle: Press Subtitle button repeatedly to select. You can select: •On •Off ViewSonic N3290w/N4290p/ N4790p...
-
Page 30: On-Screen Display Of Tv Menu
Search: Search the channel one by one. − Fine-Tune: Fine tune the channel. − Skip: Don’t save the present searched channel. − Programme Edit Use the color button to Delete, Rename, Move, or Skip channels in the Progarmme list. ViewSonic N3290w/N4290p/ N4790p... - Page 31 Enhance contrast in the darker and the brighter picture areas as the image on the screen changes. HDMI Overscan: When you watch TV by HDMI input source, you could use this function to enlarge the picture. Video content may be clipped of screen boarding. ViewSonic N3290w/N4290p/ N4790p...
- Page 32 Balance: To adjust the balance between left/right channels. Auto Volume: To eliminate the volume differences between channels and programs and also reduce the dynamics of sound. Surround: To add greater depth and dimension to the TV sound. ViewSonic N3290w/N4290p/ N4790p...
- Page 33 Off, 10min, 20min, 30min, 60min, 90min, 120min, or 240min. Auto Sleep: Select On or Off. If TV doesn’t receive the input source, select On and TV will turn off automatically. Time Zone: Select time based on GMT. ViewSonic N3290w/N4290p/ N4790p...
- Page 34 Audio Language: Available for digital channels only, when multiple languages are broadcasted. Lists available audio languages. Subtitle Language: English only CEC: on / off. Country: Australia Restore Factory Default: When this function is activated, all settings will become to factory default. ViewSonic N3290w/N4290p/ N4790p...
- Page 35 3. Press ▲▼ to highlight channels that you want to block. 4. Press Green button to lock or unlock the channel. 5. Press MENU to return to the previous menu or press Exit to exit the menu. ViewSonic N3290w/N4290p/ N4790p...
- Page 36 Exit to exit the menu. Australian Parental code Description Rating Not Classified Pre-School Children General Parental guidance Recommended Mature Audience 15+ MA (15+) Mature Adult Audience 15+. AV (15+) Adult Audience Strong Violence 15+ Restricted 18+ ViewSonic N3290w/N4290p/ N4790p...
-
Page 37: Other Information
LCD TV screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol- based cleaners... -
Page 38: Troubles Shooting
Other information Troubles Shooting Please contact ViewSonic service team directly if you have questions, service needs, or require technical assistance related on the use of your television. Contact ViewSonic Service Team at: http://www.viewsonic.com.au/support/ Or call our service team: Australia: 1800 880 818,... - Page 39 No CATV reception (or no reception above CH13) Picture is cut off / with sidebar screen ViewSonic Possible Solution Make sure the directions of batteries are inserted correctly referring to the user guide. Batteries could be weak or dead. Replace by new batteries.
-
Page 40: Specifications
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD TV. Note: Product Specifications are subject to change without notice. ViewSonic N3290w N4290p 31.5” TFT Active 42.02”... -
Page 41: Limited Warranty
How long the warranty is effective: ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser. -
Page 42: Index
HDMI Input Terminal 12 Headphone Jack 13 INFO button 20 LAST button 20 MENU button 11, 20 MUTE button 21,22 ViewSonic OK button 20 PC Audio input 12 Power LED Indicator 11 Power ON/OFF button 11, 20 Remote Control Receiver 11... - Page 43 ViewSonic ®...