Operation - ViewSonic NX1932w User Manual

Using the TV Features

Operation

Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the Power button on the front of the
panel.
Changing Channels
1. Using Channel Buttons
Press ▼CH▲ button to change channels, and the TV
changes channels in sequence. You will see all channels
that have been memorized. Channels erased or not
memorized will not be shown.
2. Using Number Buttons
(1) ATV
The "-" button has no function in ATV mode. Directly
press the number buttons to select channels.
(2) DTV
Use "-" button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press "-" → press 3.
＊Return to the previous channel, press RECALL
button.
Adjusting the Volume
Press VOL +/- to adjust volume.
To turn off the volume, press MUTE.
To restore volume, press MUTE again, or press VOL +/-
directly.
Viewing the Displayed Information
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on
the screen. (It shows all or some of the information about
Input, Channel, Resolution, Audio Type, etc., depending
on what input source it is in)
＊The picture here shows an example of the INFO screen
in a DTV source.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic 25 NX1932w/NX2232w