Rear View Of The Product - ViewSonic N3290W User Manual

Getting Started

Rear View of the Product

Item
1 Power (AC input)
2
TV Input Jack
3 YPbPr Audio input
(left/ right)
4 YPbPr signal input
5 Composite/ S-Video
Audio input (left/
right)
6 Composite Video
input
7 S-Video input
8 VGA signal input
9 PC Audio input
10 HDMI Input
11 Audio Output (left/
right)
12 SPDIF
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Description
Plug-in the supplied AC Power cord and connect to the
AC input power source.
Connect this jack to your Cable or VHF/UHF antenna
Connect the Audio in cable for YPbPr from this jack to
the corresponding connectors on your A/V device
Connect this jack to the YPbPr output of A/V device.
Connect the Audio in cable for AV/ S-Video from this
jack to the corresponding connectors on your A/V
device
Connect this jack to the composite video output
connectors on your A/V equipment.
Connect the S-Video cable from the compatible device
to this connector on the rear panel of the LCD TV
display.
Connect a 15-pin D-sub RGB cable to the RGB output
of your computer and the other end to the RGB input
on the rear of the LCD TV display.
Connect the RGB Audio Out on your computer to the
RGB Audio on the rear of the LCD TV display. This
jack is used for both PC Audio and DVI Audio input.
Connect this port to the HDMI/HDMI-DVI jack of the
compatible equipment.
Connect RCA audio cables to "Audio out" on the rear
of the LCD TV and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home
Theater.
Connect to a Digital Audio device.
12
N3290w