Mounting Viewsonic Lcd Tv To The Wall - ViewSonic N3290W User Manual

Getting Started

Mounting ViewSonic LCD TV to the wall

The LCD TV can be used in a free standing position or wall-mounted. Before installing
the product to the wall, please consider the following guidelines:
Read the Important Safety Instructions, at the start of this manual.
Do not install in a moist or wet environment. This equipment is intended for
indoor use.
Do not install near heat source, or strong magnetic fields
Use only ViewSonic approved wall-mounting brackets to support the LCD TV
weight
Before attaching the wall mount plate to the back cover, ensure the product is
working
If your LCD TV is already set up for free-standing operation, you need to first
remove the stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
Disconnect the power and any other cables that might hinder moving the LCD TV.
Set the LCD TV on a table or work surface, placing the screen face down on a
towel or woolen blanket to protect the screen surface from damage while
installing plate.
Through the matching screw holes in the bracket, there are 4 screws mounted on
the backside of the LCD TV. Loosen all 4 screws, and keep for future use.
Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm,
as longer screws found in universal (non-ViewSonic) wall mount kits may
damage the power supply causing the unit to fail. The wall-mount screw type is
M6 x L10.
Mount the wall mount bracket to the wall ensuring use of proper screws to
support the installation. Ensure there is at least 6cm of space surrounding any
air-vents of your LCD TV to allow adequate cooling during operation.
Hang the LCD TV wall mount plate to the wall mount bracket, completing
installation. Enjoy your ViewSonic LCD TV
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
9
N3290w