Operation - ViewSonic VT3255LED User Manual

Using the TV Features

Operation

Turning the TV On and Off
Press on the remote control.
You can also use the
j If there is no input signal within 10 minutes, TV will be turned off automatically.
Initial Setup
When first turning the TV on, there is no channel stored in the memory and the display shows "No Signal".
To scan for available channels:
1. Press MENU to display the OSD main menu.
2. Press ◄ or ► to select CHANNEL menu, then press ENTER to enter
the menu.
3. Press ▲ or ▼ to select Signal Type, and use ◄ or ► to select the
antenna connection to Air or Cable.
4. Press ▲ or ▼ to select Auto Channel Search, then press ENTER to
enter to perform channel scan.
5. The channel scan may take a while to complete, and after it is done, the
screen will return to the first found channel.
To stop scanning, press MENU at any time.
key on the front side of the panel.
MENU MENU
MENU MENU
ENTER ENTER
14
POWER
SOURCE
1 2 3
CHANNEL CHANNEL
Channel List
Favorite List
Channel Settings
Signal Type Air
Auto Channel Search Execute
DTV Signal 0%
:Return :Move :Change Setting
CHANNEL CHANNEL
Channel List
Favorite List
Channel Settings
Signal Type Air
Auto Channel Search Execute
DTV Signal 0%
:Return :Move :Press to Execute
ENTER ENTER
AUTO CHANNEL SEARCH - Air AUTO CHANNEL SEARCH - Air
Now Searching... Please Wait...
Return
Analog Channels Found: 2
Digital Channels Found: 0
1%
:Stop Auto Channel Search :Skip
MENU MENU