Cisco Firepower 2100 Getting Started Manual page 135

ASA Platform Mode Deployment with ASDM and Firepower Chassis Manager
b) In the Port Channel ID field, enter an ID for the port channel. Valid values are between 1 and 47.
c) Check the Enable check box to enable the port channel.
Ignore the Type drop-down list; the only available type is Data.
d) From the Admin Speed drop-down list, choose the speed for all member interfaces.
If you choose interfaces that are not capable of the speed (and other settings that you choose), the fastest
possible speed is automatically applied.
e) Click the Auto Negotiation Yes or No radio button for all member interfaces.
f) Admin Duplex drop-down list, choose the duplex for all member interfaces.
g) In the Available Interface list, select the interface you want to add, and click Add Interface.
You can add up to 16 interfaces of the same type and speed. The first interface added to the channel group
determines the correct type and speed.
Tip
h) Click OK.
You can add multiple interfaces at one time. To select multiple individual interfaces, click on
the desired interfaces while holding down the Ctrl key. To select a range of interfaces, select
the first interface in the range, and then, while holding down the Shift key, click to select the
last interface in the range.
(Optional) Enable Additional Interfaces in the Firepower Chassis Manager
Cisco Firepower 2100 Getting Started Guide
133