Cable The Device - Cisco Firepower 2100 Getting Started Manual

ASA Platform Mode Deployment with ASDM and Firepower Chassis Manager
ip-client outside
!
dns domain-lookup outside
dns server-group DefaultDNS
name-server 208.67.222.222 outside
name-server 208.67.220.220 outside
FXOS Configuration
The default factory configuration for FXOS on the Firepower 2100 configures the following:
• Management 1/1—IP address 192.168.45.45
• Default gateway—ASA data interfaces
• Firepower Chassis Manager and SSH access—From the management network only.
• Default Username—admin, with the default password Admin123
• DHCP server—Client IP address range 192.168.45.10-192.168.45.12
• NTP server—Cisco NTP servers: 0.sourcefire.pool.ntp.org, 1.sourcefire.pool.ntp.org,
• DNS Servers—OpenDNS: 208.67.222.222, 208.67.220.220
• Ethernet 1/1 and Ethernet 1/2—Enabled

Cable the Device

Manage the Firepower 2100 on the Management 1/1 interface. You can use the same management computer
for FXOS and ASA. The default configuration also configures Ethernet1/1 as outside.
2.sourcefire.pool.ntp.org
Cisco Firepower 2100 Getting Started Guide
Cable the Device
121