4
Settings and Adjustments
How to configure Delay Transfer settings
Important
When a transfer destination includes the Mobile App of another Unit, the original call to any Mobile Apps will be
canceled when the transfer occurs.
Refer to
"Configuring settings (→page 74)"
1.
On the Transfer Settings screen, tap [Delay Transfer].
• The Delay Transfer Settings screen will be shown.
2.
Tap [NEW] to configure the transfer destination unit.
To configure a retransfer destination, tap the "Re" row and tap [EDIT].
* Up to 1 unit can be configured for the transfer destination. 1 station can be configured for the re-transfer (i.e.
transfer a transferred call) destination.
• To change a registered transfer destination, tap the destination to change, and tap [EDIT].
• To delete a registered transfer destination, tap the destination to delete, and then tap [DELETE].
• The Select Destination screen will be shown.
3.
Tap the unit or station to configure as a transfer destination.
* If specifying units or stations in other buildings, tap [SELECT BUILDING] first, and select a building.
* Refer to
"Searching for stations (→page 31)"
4.
Tap [ENTER].
• The Delay Transfer Settings screen will be shown.
* Stations of the room set as the transfer destination are displayed in rows No. 1 to 10 (left-side column of the
transfer destination station list), and the station set as the retransfer destination is displayed in the "Re" row.
Configuring on the station
for information on how to display the setting screens.
to search for units and stations.
94