Aiphone IXG System Operation Manual page 97

4
Settings and Adjustments
4.
Tap [NEW] to configure the transfer destination unit.
To configure a retransfer destination, tap the "Re" row and tap [EDIT].
* Up to 1 unit can be configured for the transfer destination. 1 station can be configured for the re-transfer (i.e.
transfer a transferred call) destination.
• To change a registered transfer destination, tap the destination to change, and tap [EDIT].
• To delete a registered transfer destination, tap the destination to delete, and then tap [DELETE].
• The Select Destination screen will be shown.
5.
Tap the unit or station to configure as a transfer destination.
* If specifying units or stations in other buildings, tap [SELECT BUILDING] first, and select a building.
* Refer to "Searching for stations (→page 31)"
6.
Tap [ENTER].
• The Set Daily Schedule screen will be shown.
* Stations of the room set as the transfer destination are displayed in rows No. 1 to 10 (left-side column of the
transfer destination station list), and the station set as the retransfer destination is displayed in the "Re" row.
7.
Configure the start time and end time.
8.
Tap [SELECT].
• The settings will be saved.
Configuring on the station
to search for units and stations.
97