Comdial GCA70-313 User Manual page 67

GCA70-313
You can store feature access codes at programmable buttons to provide yourself
with one-button access to features that you use quite often. To find your feature code
of interest, refer to Appendix A on page 73.
To manually store an access code,
1. PRESS INTERCOM.
2. DIAL
3. PRESS programmable button to choose storage location.
4. DIAL access code for feature.
5. LABEL button location.
6. PRESS next location button and store next feature code.
7. REPEAT previous steps until all desired feature codes are stored.
8. PRESS SPEAKER to end.
For example, to program a button to provide group call
pickup (access code #4),
1. PRESS INTERCOM.
2. DIAL
3. PRESS programmable button to choose storage location.
4. DIAL
5. LABEL button location.
6. PRESS SPEAKER to end.
Non-LCD Station User's Guide
.
.
.
Programming
59