Table of Contents
Advertisement
GCA70-313
4. CHOOSE your speed dial route from the following list:
• PRESS line button to select outside line.
• DIAL
• DIAL
• PRESS INTERCOM button or dial
NOTE:
You may need a pause between numbers to compensate for differ-
ences in response time between your system and the host system (ask your
attendant about this). To store a pause, press HOLD, then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press TAP to store a hookflash, then continue dialing.
5. DIAL number (up to 16 digits long—include
needed).
6. PRESS TRNS/CONF to store the number.
7. REPEAT previous steps until all numbers are stored.
8. PRESS SPEAKER to end.
You can record your station's programmed DSS and speed dial numbers on page
56 for quick reference.
Non-LCD Station User's Guide
to select prime line or last line used.
to
to select line group.
Programming
to select intercom.
and
if
55
Hide quick links:
Advertisement
Table of Contents
