Parallel & Corner Installation; Wall And Ceiling Clearances; Hearth Requirements - Vermont Castings SDDVTCB, SDDVTEB, SDDVTMB, SDDVTBS, SDDVTCH, SDDVTVG, SDDVTBD,SDDVTCCB, SDDVTCEB, SDDVTCMB, SDDVTCBS, SDDVTCCH, SDDVTCVG, SDDVTC Installation And Operating Manual

Parallel Installation: Minimum Clearance
and Flue Centerline, Direct Vent and
Natural Vent
C
D
C L
B
Stove Clearances: A: 4" (102 mm)
B: 4" (102 mm)
Pipe Centerlines: C: 15¹⁄₂" (395 mm)
ST128b
D: 9" (229 mm)
Stardance
Fig. 3 Parallel installation, minimum back and side clear-
ances, and flue centerlines.
flue centerline
9/28/00 djt
Corner Installation:
Minimum Clearance and Flue Centerline,
Direct Vent and Natural Vent
B
B
A
Stove Clearance:
Pipe Centerline:
Fig. 4 Corner installation, minimum corner clearance and flue
centerline.
20012734
C L
A
ST128b
A
ST129b
A: 4" (102 mm)
B: 14¹⁄₂" (370 mm)
ST129b
Stardance
corner specs
9/28/00 djt
Stardance Direct Vent/Natural Vent Gas Heater
Wall Centerline from Floor
Direct Vent Only
A
Effective Minimum
Wall Thimble 56" (1480 mm) (CFM Pipe)
Centerline 52" (1378 mm) (Simpson Duravent Pipe)
Fig. 5 Minimum wall thimble centerline.

Wall and Ceiling Clearances

B
C
A: Rear Wall
B: Min. Clearance
C: Min. Alcove Height
ST101b
D: Max. Alcove Depth
Stardance
Sidewall Clearance
Direct Vent
Fig. 6 Dimensions and clearances to ceiling or alcove.
Min. Clrnc
9/28/00 djt

Hearth Requirements

The Stardance Heater must be installed on rigid floor-
ing. When the heater is installed directly on any com-
bustible surface other than wood flooring, a metal or
wood panel extending the full width and depth of the
unit must be used as the hearth. There are no other
hearth requirements.
ST131b
ST131b
Stardance
wall thimble
9/28/00 djt
D
A
ST101b
4" (102 mm)
45¹⁄₄" (1154 mm)*
72" (1830 mm)
48" (1220 mm)
4" (102 mm)
7