Probes
1. About Probes
A CA-410 series probe can be used to measure the luminance, chromaticity, and flicker values of displays.
A probe can be controlled in the following three ways:
• You can connect a probe to a PC and control it from PC software to perform measurement. By using the standard
software, PC Software CA-S40 For Color Analyzers, you can select one of the probes connected to a PC via USB and
control it to perform measurement.
Display
• You can connect a probe to a data processor and control it from the data processor to perform measurement. Multiple
probes can be controlled simultaneously to perform measurement.
Display
• You can connect a probe to a data processor, connect the data processor to a PC, and control it from PC software to
perform measurement. By using the standard software, PC Software for Color Analyzer CA-S40, you can select one of the
probes connected to the data processor and control it to perform measurement.
Display
Probes (only one probe can be controlled)
USB cable connection
Probes (up to 10 probes can be controlled simultaneously)
Mini DIN cable connection
or USB cable connection
Data Processor
Probes (only one probe can be controlled)
Mini DIN cable
connection or USB
cable connection
Data Processor
12
PC
USB
connection
RS-232C
BNC (sync/trigger)
PLC or PC
CA-S40
PC
CA-S40