By Entering Values - Konica Minolta CA-410 Instruction Manual

Setting/Changing the Target

3. By Entering Values

Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[Target], and then press the [RIGHT] or
[ENTER] key.
3
Press the [UP] or [DOWN] key to select
[Enter Value], and then press the
[RIGHT] or [ENTER] key.
4
The screen for selecting a probe is
displayed. Press the [UP] or [DOWN] key
to select the probe to register, and then
press the [RIGHT] or [ENTER] key.
5
The screen for selecting a calibration
channel is displayed. Press the [UP] or
[DOWN] key to select the target value to
register.
This screen allows the current data to be checked.
6
Press the [ENTER] key.
The screen for entering a target is displayed.
MENU
M e a s C o n d
U s e r C a l i b
T a r g e t
O p t i o n
S y s t e m
MENU
M e a s C o n d
U s e r C a l i b
T a r g e t
O p t i o n
S y s t e m
MENU
M e a s C o n d
U s e r C a l i b
T a r g e t
O p t i o n
S y s t e m
MENU
Target ＞ Select CH
01 CH00
CH01
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
98
Trigger mode 0-cal AUTO
M e a s u r e a n d R e g i s t e r
E n t e r V a l u e
Trigger mode 0-cal AUTO
M e a s u r e a n d R e g i s t e r
E n t e r V a l u e
Trigger mode 0-cal AUTO
M e a s u r e a n d R e g i s t e r
01
E n t e r V a l u e
02
03
04
05
06
07
08
09
10
▶