Siemens FC2005 Programming Manual page 61

FT2007: Name
System LED Name Addition
System LED List
FT2007: Name
Input
Name Addition
InputType
Button List
FT2008 Name
FT2009 Name Addition
FT2018
Address
FT2019
Local device
Location
UFP annunciator Name
Address
Report Alarm
Report Supervisory
Report Trouble
Report Status
Location
Printer Name
Address
Supervision
Report Alarm
Report Supervisory
Report Trouble
Report Status
Location
60|63
Programming Manual of FC2005/FC901
user selects Stub A in the tool, the device must connect to
Stub A (primary port) as well on the panel, otherwise, error
occurs. It doesn't matter if the wiring style is Class A.
Name of the device
Addition description of the device; max. 20 characters
Reset, Acknowledge (default), Silence, Audibles On, Trouble,
Ground Fault
Name of the device
Addition description of the device; max. 20 characters
Generic (default), System Input
Only available when System Input is selected for InputType:
Reset (default), Acknowledge, Silence\Unsilence, Lamp Test
Name of the device
Additional description of the device; max. 20 characters
Range: 1...8; System assigns one address automatically once a
device is added.
Bool: True / False (default)
Option: Stub A, Stub B
When the wiring style of UFP line is selected as Class B, then if
user selects Stub A in the tool, the UFP device must be installed
on the Stub A (primary port) on the panel, otherwise, the UFP
device will not be detected by the panel. It doesn't matter if the
wiring style is Class A.
Name of the device
Addition description of the device; max. 20 characters
Bool: True (default) / False
Bool: True (default) / False
Bool: True (default) / False
Bool: True (default) / False
Option: Stub A, Stub B
When the wiring style of UFP line is selected as Class B, then if
user selects Stub A in the tool, the UFP device must be installed
on the Stub A (primary port) on the panel, otherwise, the UFP
device will not be detected by the panel. It doesn't matter if the
wiring style is Class A.
Name of the device
Addition description of the device; max. 20 characters
Bool: True (default) / False
Bool: True (default) / False
Bool: True (default) / False
Bool: True (default) / False
Bool: True (default) / False
Option: Stub A, Stub B
When the wiring style of UFP line is selected as Class B, then if
user selects Stub A in the tool, the UFP device must be installed
A6V10333724_b_en_--