Alphanumeric Character Entry - Siemens FC2005 Programming Manual

3. ALPHANUMERIC CHARACTER ENTRY

Numerals entry:
Press numeral key, then the numeral is entered.
Letters entry:
Letters are entered using numerals key. Press down the numeral key which includes the letter (shown at the
upper left corner of key), all included letters (upper case and lower case) and the numeral will be orderly and
repeatedly displayed. When the needed letter is displayed, release the key, the needed letter is entered. (i.e.,
how to enter "S", press down numeral "7" key, the numeral "7" and letters "P"/"p"/"Q"/"q"/"R"/"r"/"S"/"s" will be
displayed orderly and repeatedly. When "S" is displayed, release the key and "S" is entered.)
Punctuation marks entry:
Press down numeral "1" key, the punctuation marks "."/","/";"/":"/"@"/"#" will be displayed orderly and
repeatedly. When the needed mark is displayed, release the key and the needed mark is entered.
Press "←"/"→" to move the cursor forward and backward.
Press "↑" to delete the previous character of the cursor.
Press "↓" to delete the backward character of the cursor.
Button Inputting characters
0 0
1 "1"/"."/","/";"/":"/"@"/"#"
2 "2"/"A"/"a"/"B"/"b"/"C"/"c"
3 "3"/"D"/"d"/"E"/"e"/"F"/"f"
4 "4"/"G"/"g"/"H"/"h"/"I"/"i"
5 "5"/ "J"/"j"/"K"/"k"/"L"/"l"
6 "6"/"M"/"m"/"N"/"n"/"O"/"o"
7 "7"/"P"/"p"/"Q"/"q"/"R"/"r"/"S"/"s"
8 "8"/"T"/"t"/"U"/"u"/"V"/"v"
9 "9"/"W"/"w"/"X"/"x"/"Y"/"y"/"Z"/"z"
14|63
Programming Manual of FC2005/FC901
A6V10333724_b_en_--