Husqvarna 545 Mark II Workshop Manual page 55

5. Attach the cables.
B
E
C
a) Attach the cable (A) between the generator and
the heating element.
b) Attach the cable (B) between the generator and
the carburetor.
c) Attach the cable (C) between the rear handle
and the carburetor.
d) Attach the cable (D) between the heating
element and the carburetor.
e) Attach the cable (E) between the heating
element and the rear handle.
6. Pull up the hoses through the carburetor bottom
plate. Pull up the throttle wire through the carburetor
bottom plate.
7. Put the product on the tank unit.
722 - 003 - 26.03.2019
B
D
A
8. Attach the deflection limiter.
9. Attach the handle to the product and the tank unit.
Pull the wires through the hole in the handle and
connect them.
Repair instructions - 55